This is a simple instruction of using the SwapMagic discs on the v13, v14, v15 and v16 (SCPH-77xxxx) PStwo console.

By using the TwistTool PRO, you don't need to open your console to do modification, that means you will not void the warranty.

First open the disc drive lid and locate the two disc sensors and the break for the disc. You need to install two small tools to activate the switches and a plug to stop the disk break.


1) The first micro switch for the Twist-Tool PRO A is at the small hole near the right corner.

2) The disc break for the Twist-Tool PRO B locate at the inner right side near the disc concave.

3) The second micro switch for the Twist-Tool PRO C is at the small hole near the right corner.

The first micro switch for the Twist Tool PRO A is at the small hole near the right corner:

Stick component 1 in the hole over the on/reset button of your console, like on the photo.

The disc break for the Twist Tool PRO B locate at the inner right side near the disc concave:

Now move the disk break to the right and hold it. Stick component 2 to the left site of the disk break, as shown.

The second micro switch for the Twist Tool PRO C is at the small hole near the right corner:

And last, put a Game or Swap Magic disc into your PlayStation, push the ON / RESET button and insert TwistTool PRO C into the 1mm gap situated in the back left site of your console. When Twist-Tool PRO C was inserted correctly the disc automatically starts to rotate! If the disc does not rotate after you have inserted Tool C move the component a little bit to the left and to the right until the disc rotates! For more infos look the Twist Tool PRO C installation VIDEO. (144KB, divx is required)

Click on the image to see the TwistTool PRO C installation VIDEO (144KB, divx is required)

The Twist-Tool PRO can be left in your console because it works with original CD / DVD discs without any problems. The cover can be left open or closed when playing your games.

If all switches had been pressed than you can place the Swap Magic disc into the driver. And when the disc stops spinnig than you can replace the Swap Magic disc with the backup or import game disc :-)