This is a simple instruction of using SwapMagicDiscs on the latest PS2 console SCPH-7000x sliver edtion.

By using the PSTwo-FIX, you don't need to open your console to do modification, that means you will not void the warranty, but this works only with the new PSTwo-Fix or original SlimTool and not with the Slim-Tool PRO or Magic-Switch!

First open the disk drive opening and locate the two disk sensors and the break for disk. You need to install two small activator to activate the switches and a plug to stop the disk break.


1) The first micro switch for the PSTwo-FIX A is at the small hole near the right corner.

2) The disc break for the PSTwo-FIX B locate at the inner right side near the disc concave.

3) The second micro switch for the PSTwo-FIX C is at the small hole near the right corner.

The first micro switch for the PSTwo-FIX A is at the small hole near the right corner:

Here see you the position from the first micro switch. Push the PSTwo-FIX A into the sensory hole (we recommend to fix the PSTwoFIX A with an adhesive tape).
On this picture see you the PSTwo-FIX A when it was installed correctly.

The disc break for the PSTwo-FIX B locate at the inner right side near the disc concave:

On this picture see you the position for the PSTwo-FIX B in unmodified form.
Move the disc break switch with the help of a small pen or a small scredriver to the right and hold it in this position.
Put the PSTwoFIX B in the left hole from the disc break switch.
On this picture see you the PSTwo-FIX B when it was installed correctly.

The second micro switch for the PSTwo-FIX C is at the small hole near the right corner:

On this picture see you the position for the PSTwo FIX C in unmodified form with the new metal cover protection.
Use a small screwdriver to push up the front of the metal cover to the right.
Now use a small flat pliers to open the complete metal cover.
On this picture see you the opened metal cover.
Remove the top from the PSTwo-FIX C and push it with the help from a small screwdriver downwards. Attention to the orientation as shown below: When the PSTwo FIX C is laying flat your console you can push back the metal cover to fasten the FIX C. Your PSTwo silver edition is ready for use.

The PSTwo-FIX can be left in your console because it works with original CD / DVD discs without any problems. The cover can be left open or closed when playing your games.

If all switches had been pressed than you can place the Swap Magic CD / DVD into the driver and run it for a while.